Remote-controlled car with autonomous self-parking on a modified 3D-printed Enzo Ferrari body. Brushless drivetrain, 4 laser distance sensors, a custom breakout PCB, and Bluetooth smartphone control.
4× VL53L0X ToF laser 4× brushless DC ESP32 Bluetooth
Starting from a modified 3D-printed Enzo Ferrari body, this project integrates a full mechatronic system: brushless DC drivetrain, custom breakout PCB, laser obstacle detection, and Bluetooth control from a smartphone app.
The autonomous parking mode uses four VL53L0X time-of-flight laser sensors to detect two flanking obstacles and execute a parallel parking maneuver without any human input. A custom breakout PCB inside the body handles power regulation, sensor interfacing, and the tail lights.
4 laser distance sensors detect flanking obstacles and trigger a full autonomous parallel parking sequence — zero human input required.
Four 10,000 RPM brushless DC motors on a 1,400 mAh LiPo. The 40A ESCs were one-direction quadcopter units, so forward and reverse are split across the axles: the rear motors drive the car forward, and the front motors are wired in reverse to back it up.
Designed a custom through-hole breakout board that mounts inside the body, handling battery-to-5V regulation, I²C sensor interfacing, and tail-light drive.
The ESP32 handles the Bluetooth link to a smartphone app, carrying manual RC control and telemetry alongside the autonomous parking mode.
Designed and fabricated the car around a modified 3D-printed Enzo Ferrari model, engineering custom mounting and clearances for all subsystems.
High-torque 20 kg servo motor provides precise steering authority for both manual RC control and the autonomous parking maneuver sequences.